Fluid Cooler - Introduction

HOME PRODUCTS ABOUT US NEWS MEDIA CONTACT

When Water Matters
The Muller 3C Fluid Cooler is a closed circuit heat rejection system.  Meaning the condenser water flowing though the unit is in a closed loop and doesn’t get exposed to outside air. This means the fluid in the circuit remains clean and efficient.
The unit is assisted by adiabatic CelPads over the face of the coils. These pads remain dry until ambient conditions reach the point that the fan alone can no longer handle the heat load. The water is switched on and the pads are dampened. This process pre cools the air before passing through the coil, increasing the efficiency of the unit.  Muller 3C series of environmentally sustainable heat rejection systems consists of two model ranges:
- SH08 Series with 8 models for capacities 70kW HOR to 300kW HOR
- H08 Series with 13 models for capacities from 300kW HOR to 700kW HOR 
Muller 3C Closed Circuit Coolers with air pre-cooling were developed to replace conventional cooling towers without need to alter any existing water lines and pumps.  Muller 3C technology offers significant benefits over traditional water-cooled systems, such as:  
- Eliminating the risk of Legionella
- No registration required - No need for costly chemical water treatment
- Reduced water consumption by up to 80%
- Cleaner water loop (improved system efficiency)